WATERPROOF

Regardless of the stone type you have – slate, limestone, granite, travertine, marble, lava stone, the right choice of cleaning, maintenance, and protective treatment is essential to prevent staining, limescale or other substances causing damage to horizontal or vertical stone surfaces. Stones impregnation is the process of applying a surface treatment of natural stone products in order to delay their discoloring and corrosion. Natural stone contains intertwined capillary channels in its structure. The stones that are very porous, such as limestone, absorb liquids relatively quickly, while higher density stones, such as granite, are significantly less porous; they absorb smaller and slower volumes, especially when absorbing liquids.

Waterproof


DN 209 – water repellent impregnated with wet effect

Features and Uses:
DN 209 is a product designed for the treatment of colored granite, marble, stone and paving materials, enhancing natural colors. It provides waterproofing and water repellent properties to the treated surface, thus increasing the resistance to external agents.
Way of ussage:
Apply uniformly on the side to be treated with a brush, roller or spray, on a clean, dry surface. For highly absorbent materials, two or more layers of product are recommended.
Coverage: Approximately 10-20 m² / liter, depending on the degree of absorption of the material to be treated.

BETAWAX – water repellent with wet effect

Features and Uses:
Betawax is a product for the treatment of granite and marble. It covers small excoriations and microfractures, improving polishing and helping to enrich natural colors. It provides waterproofed and water-repellent properties to the treated surface, thus increasing resistance to external agents. Adding special pigments allows intensifying insufficient natural colors.
Way of ussage:
Manual – Spray a few drops of Betawax on dry and uniform plates with a dry and clean cloth
Mechanized – Apply the product to automated machines using the pure product or adding pigmented pigments as required.
Coverage: Approximately 20 m² / liter, depending on porosity

SIL 290 – wet-oleohydrorepelent impregnation

Features and Uses:
SIL 290 is a protective impregnant with a wide use against oil stains, wine, detergents, etc. It is used to protect kitchen countertops, tables, bathrooms and flat or vertical surfaces made of marble, stone or granite. Treated superficials get a moist effect hue showing the veins and the color tones of the material.
Features and Uses:
The treated surfaces must be clean and dry. Apply directly to the surfaces need treatment by spraying, roller, brush or dry cloth.
Wait for 20-30 minutes until the product is absorbed, then wipe the surface treated with a dry cloth or paper. For effective stain protection, it is good to apply the product after 1 year.
Coverage: 15-20 mp / liter

GMS 511 – Water repellent impregnation with natural effect

Features and Uses:
GMS 511 is the ideal product for protecting flat and vertical surfaces, stairs and marble, stone, granite or paving slabs. It offers water resistant treated surfaces and increased resistance to external agents such as acid rain, smog, frost and moisture, preserving their natural color.
Way of ussage:
Apply uniformly on the side treated with a brush, roller or spraying on a clean, dry cloth. For highly absorbent materials, two or more layers of product are recommended.
Coverage: 10-20 mp / liter. Depending on the degree of absorption of the material to be treated

DEFENDER – oleohydrorepelent impregnant with natural effect

Features and Usage
Defender is a protective impregnant with a broad spectrum against oil stains, wine, detergents, etc. It is used to protect kitchen countertops, tables, baths and flat or vertical surfaces made of marble, stone or granite.
Way of ussage:
Apply on clean and dry surfaces by spraying, roller, brush or dry cloth. Wait for 20-30 minutes until the product is absorbed, then wipe the surface treated with a dry cloth or paper.
Coverage: 15-20 mp / liter

A.G.E T7 – ​​impregnated, glossy (semi-gel) impregnant for brushed or filamentous material.

Features and Usage
A.G.E T7 is a resin-based natural product specially made for the treatment of natural stone marbles and marble after sanding with A.G.E T5. Treated superficials get a shade of anticed effect showing the veins and the color tones of the material.
It can be used for both interior or exterior surfaces so that the treated surfaces become oleohydrorepelent.
Way of ussage:
Apply with a brush on clean and dry surfaces, paying attention to the correct alignment of the product with a short-fiber cotton roller.
It is recommended to use the product in well ventilated areas, avoiding direct vapor inhalation.
Coverage: Approximately 20 m² / liter

PROFESSIONAL STONE SEALER

Features and Usage
Professional Stone Sealer is a water-based organic solvents product used in the protection of stone surfaces against water, dirt and freeze-thaw effect. It is suitable for both internal and external applications. It is easy to use, with a wide applicability especially for high absorption natural stone surfaces. Professional Stone Sealer does not change the natural appearance of the stone, it does not produce agglomerations, traces or halos. It is UV resistant. It presents limited protection against acids.
Way of ussage:
Apply on clean and dry surface at a temperature above 10 ° C with brush, roller, sprayer, paste, avoiding excess product. Apply a uniform coat to ensure complete penetration. On very porous surfaces it is recommended to apply two hands at a minimum of 4 hours.
Coverage: for stones with a high absorption between 4-5 m² / liter
for stones with average absorption between 8-12 mp / liter

TOTAL WET

Features and Usage
Total Wet is a moisture-proofing treatment that prints on the treated surfaces the “wet” effect. Indicated for all natural stone, marble, travertine, granite, agglomerated flooring floors, with different colors, the product being recommended both indoors and outdoors. The treated surfaces become more protected against stains due to its special formula in which the solvent mixture penetrates inside the material. Applying Total Wet treatment takes a deep look into the color of the stone, does not form stains, does not produce translucent or film-like effects. It is resistant to UV radiation
Way of ussage:
It is applied on clean, dry surfaces, uniformly, being a solution that changes the tone of the color, the solution is applied in an abundant layer so that the stone absorbs the necessary amount, generally requiring a sprayer or a cloth treatment of cotton. Careful attention must be paid when removing the surplus solution (where applicable). For absorbent materials, it is recommended that after the treatment leave an interval of 5-6 hours, the second treatment to be applied in the opposite direction to how the first treatment was applied. If the solution has been applied excessively, it is recommended to wipe with a clean cotton cloth.
Coverage: for stones with a high absorption between 8-10 mp / liter
for stones with an average absorption of between 15-20 mp / liter

QUASAR

Features and Usage

QUASAR is a protective treatment against stains. It is suitable for all types of polished natural stone for both inside and outside. Treated surfaces become resistant to water, dirt, freeze-thaw effect, oil stains, fat, food, etc. Due to its special formula, the treatment deeply penetrates the treated surface by providing a high protection against scalding for a long time. Treatment does not alter the natural appearance of the stone, it does not form spots and there are no translucent or film effects. It is UV resistant. Does not offer protection against acids!

Usage
Can be applied on polished surfaces of natural stone, marble, granite, etc. interior or exterior. Prior to application, the surface must be clean and dry. Apply uniformly with a spray or cotton cloth or microfibre, avoiding excess product. On porous surfaces, two applications with a minimum drying time of 4 hours are recommended. The product is applied as such. Do not spread on dirty surfaces and where the temperature is below 10 ° C. Before using the product, it is recommended to carefully read the technical data sheet and perform a small sample test to determine if the effect of the product is the one desired. Ensure good ventilation of the area where the product is applied.
Consumption
For surfaces with average absorption between 8-12 mp / l
For surfaces with low absorption between 15-20mp / l

WET SEAL

Features and Usage
WET SEAL is a protective treatment against moisture, oil stains, grease, food, dirt etc. It is suitable for both indoor and outdoor floors made of natural stone, marble, granite, travertine with mat finish, buckthorn, brushed, raw, etc. Surfaces treated with WET SEAL become resistant to staining for a long time, thanks to the special formula that ensures a deep penetration into the treated material. Applying the treatment accentuates the shade of the stone giving it a “wet” look. No stains, no translucent or film-like effects. It is UV-resistant. It does not protect against acids!
Usage
Prior to application, the surface must be clean and dry. Apply uniformly with a sprayer, cloth or cotton applicator, avoiding excess product. On porous surfaces, two applications with a minimum drying time of 4 hours are recommended. The treatment becomes effective 24 hours after application.
The product is applied as such. Do not spread on dirty surfaces and where the temperature is below 10 ° C. Before using the product, it is recommended to carefully read the technical data sheet and perform a small sample test to determine if the effect of the product is the desired one. Ensure good ventilation of the area where the product is applied.
Consumption
Consumption varies depending on the porosity of the stone:
For stones with a high absorption between 4-6 mp / l
For stones with average absorption between 8-12mp / l

Antislip


A.G.E T5 – chemical saber for marble and limestone

Features and Usage
A.G.E T5 is an acid product that produces chemical sandblasting / antichristing for many types of marble, limestone or other materials. It is a easy to use product, being used on small surfaces with kitchen countertops, ladders, rustic flooring, etc ..
Way of ussage
Apply the product evenly to the horizontal work surface with a sprinkler or spraying.
Let the product work for 5-10 minutes and then wash with plenty of water. For a more stunned effect, let the product work for longer. To highlight or enhance the color of the material and to protect it from external agents, apply after drying Betawax or A.G.E T7
Coverage: 4-7 mp / liter

A.G.E T9 – granite anti-slip treatment

Features and Usage
A.G.E T9 is a non-slip treatment for polished granite surfaces or crystalline stones, thus preventing sliding when wet. It is a easy to use product being used on various surfaces such as stairs, terraces, sidewalks, etc …
Way of ussage
Before use, clean the dirt or wax surface where necessary. Apply uniformly the product to the horizontal work surface with a sprinkler, mop or spraying.
Let the product work for 2-5 minutes and then wash with plenty of water. For a more advanced anti-slip effect, repeat the application until you get the desired effect.
To emphasize or enhance the color of the material and to protect it from external agents, apply after Betawax drying.
Coverage: 8-10 mp / liter

Rustop T1 – removing rust stains

Features and Usage
Rustop T1 is a special product used to remove rust stains from all iron-rich granites (Kashmir, Solar White, Camelia White, Azularan …). It reduces and removes yellowish spots and prevents them from reforming on clean surfaces.
Way of ussage
Spread it evenly across the surface, even vertically, with a broom, from the bottom up. Distance the plates with plastic pieces so that the product can work for an hour or even longer in some cases.
To prevent darkening of the color on lighter materials, it is recommended to dilute the product (7 parts of Rustop T1 and 3 parts of water).
After using the product, we recommend to apply of water repellent, GMS 511, Betawax to protect the material from external agents (acid rain, smog, frost, humidity …)

Silicone-based liquid wax


SIL WAX

SILWAX is a silicone wax formulated specifically for the regular maintenance of marble, granite and natural stone surfaces, especially for dark stones. Due to its special formula it cleans, protects and gives a luster to the surface treated. SILWAX revitalizes the shades of stone enhancing its shades and highlighting the veins while protecting the surface against stains of dirt, oil, wine, coffee etc. SILWAX allows the surface to breathe.
Usage
Remove all objects and furniture from the surface to be treated. Make sure the surface is clean and dry. SILWAX is ready for use. Apply the product evenly with a spray gun, brush, microfibre mop or roller. Allow to dry for a few minutes, then wipe the surface with a dry cloth or a polishing machine to get the final chandelier.
Protect untreated surfaces with a plastic foil.
Consumption: Depending on the porosity of the surface between 30-50mp / l

Detergents


MARBLE CLEANER – Bleach detergent for adhesives, cement, dust, salts.

MARBLE CLEANER – Bleach detergent for adhesives, cement, dust, salts.
Features and Usage
Marble Cleaner is a complex product designed for many uses. It is especially used as a bleach and decalcifier for recovering dirt and aging surfaces made of marble, stone, granite or pavements (when removing fluorescents). It can be used to remove residues resulting from cutting and assembly operations, cement stains and glue.
Way of ussage
Apply the product evenly with a brush, poured directly onto the material or spraying, and allow it to work for a few minutes, then rub with a plastic brush (if necessary) and wash / rinse with plenty of water. The treatment surfaces do not come into contact with water.
Do not use on glossy surfaces of marble, travertine, limestone because it matures them !!!

STONE CLEANER – detergent for dyed, musky, tannin, wood and other colors stains

Features and Usage
Stone Cleaner is used to clean dirty and smeared materials such as smog, algae, moss or dirt, and can be applied on smooth or matte surfaces.
Stone Cleaner has a strong oxidizing and penetrating action and is very easy to remove after use.

Usage
Apply uniformly to the surface that needs cleaning and leave for a few hours, then clean with a brush if necessary and remove it with water. If the surface is not completely clean, than repeat the operation.

Coverage – 5-10ppm / liter

CORMAC – alkaline detergent to remove dust, oil, smog.

Features and Usage
Highly concentrated, universal liquid detergent for removing smog and grease from stone, marble, granite, pavement, etc.
Usage:
Spray on the desired surface, wait a few minutes, then remove it with a dry cloth or directly with water. Where necessary, a plastic brush can be used.
Application: Use pure or diluted product in water up to 50%. Do not use with other detergents, this may cancel the effect of the product.

T-POWER – sanitary cleaner for maintenance / daily cleaning flooring (household)

Features and Usage
Hygienic detergent used to combat and stop the development of bacteria, microorganisms, fungus, etc.
Usage:
Daily, as hygienic for bathrooms, kitchens, pavements, restaurants. Do not use with other detergents, this may cancel the antibacterial effect of the product.
Application: 3-4 caps per 5 liters of water

NETTAX – self-lubricant spray for countertops, tables (household)

Features and Usage
Nettax is a self-lucid spray that cleans and waterproofs instantly. Nettax is a neutral product made of special silicone resins designed for glossy marble, stone or granite surfaces (kitchen countertops, bars, tables, etc …)
Way of ussage:
Apply at a distance of 25 cm from the surface you want to treat, and then spread evenly with a dry cloth. Shake the spray before use

CLEAN STONE

Features and Usage
Clean Stone is a hygienic, neutral pH detergent used to clean and wash daily marble, granite, ceramic, terracotta, cement floors, etc. CLEAN STONE is a clean, completely biodegradable, non-acid and non-abrasive detergent solution used for the maintenance of polished, varnished, antique, impregnated floors. It is ideal for both residential and commercial residences. It is recommended to be used in kitchens, bars, hotel baths, conference rooms, restaurants, etc. The detergent removes dirt and dust and leaves the surface clean and beautiful.
Usage
For a maintenance cleaning, dilute the product in water proportion of 1:30, then wash the surface with a mop.
For a deeper cleaning apply 1:10 dilute solution with a cotton mop, let it act for a few minutes and then rinse thoroughly with water.
Before using the product, it is advisable to carefully read the product file and perform a safety test on a small surface to determine if the effect of the product is the desired one.

DE GRAUB

Features and Usage
DE GRAUB is a water-soluble, water-based detergent, especially used to remove grout or cement residues from natural stone, sandstone, ceramic, concrete, etc. Ensures an aggressive and deep cleaning of dirty surfaces.
DE GRAUB is recommended for removing dirt during installation on matte, brushed, non-polished surfaces etc. Does not cause damage to the natural texture of the surfaces of the stones. Do not use on limestone, marble or travertine surfaces!
Usage
Before using the product, it is recommended to protect the surfaces of glass, metal, aluminum, furniture, plants, etc. nearby. If the detergent is used indoors, it is recommended that the room be well ventilated.
Before washing, moisten the surface with water, apply the detergent solution and let it work for 2-3 minutes. Brush with a brush or monodisc, then rinse thoroughly with water. Remove all residues.

-for normal washes a dilution of 1:10 is used.
-for difficult washes a 1: 2 dilution is used.

-in order to remove very difficult residues, pure, undiluted product is used.
The product is applied on granite, andesite, natural stones and ceramic floors with matte, brushed, abrasive, raw, fiamate finish, etc.
Do not use on glossy lime surfaces!
Do not leave the product in contact with the cleaned surface for more than half an hour. Before application, it is recommended to test the product on a small surface to check if it is suitable to treat thesurface and if the effect meets your requirements.

MAC MUD

Features and Usage
MAC MUD is a highly concentrated, water-based alkaline detergent that is suitable for cleaning dirty surfaces to remove greasy stains, coffee, wine and other residuals that appeared in time. Due to its concentrated formula it is recommended to remove persistent dirt. It does not cause damage to the natural texture of the surfaces of the stones.
Usage
Before using the product, it is recommended to protect the glass, metal, aluminum, movable, plant, etc. that are nearby. If the detergent is used indoors, it is recommended that the room be well ventilated.
Before washing yourself, moisten the surface with water, apply the detergent solution, let it run for 5-10 minutes.
For handwashing, one part of the detergent is diluted to 10 parts water, rub with the brush and rinsed thoroughly with water, ensuring that you have removed all the residue.
For mopping wash use a dilution of 1:30 parts water, for scrubber use a dilution of 1:20 parts water.
For difficult stains use pure, undiluted product.
The product is applied on clinker, marble, granite, natural stones and industrial floors, matt ceramics, sandblasted floors, brushes, etc. Do not leave the product in contact with the surface that need cleaning for more than half an hour. Prior to applying, it is recommended to test the product on a small surface to check if it is broken and if the effect meets your requirements.

Natural Stone Rocas Decor
We can offer you free consultancy in choosing natural stone and granite in Cluj Napoca and in all the showrooms in the country and we can make a personalized offer for you to benefit from the most efficient solution for the projects in which we will collaborate! Natural Stone Offer

Brasov| Cluj Napoca| Constanta| Timisoara| Bucuresti| Iasi| Craiova| Galati| Ploiesti| Braila| Oradea| Bacau| Pitesti| Arad| Sibiu| Baia Mare| Satu Mare| Ramnicu Valcea| Piatra Neamt| Drobeta – Turnu Severin| Suceava| Targu Jiu| Targoviste| Resita| Bistrita| Slatina| Calarasi| Hunedoara| Deva| Alba Iulia| Zalau| Sfantul Gheorghe| Turda| Medias| Slobozia| Lugoj| Medgidia| Petrosani| Miercurea Ciuc| Sighetu Marmatiei| Mangalia| Dej| Campina| Campulung| Reghin| Odorheiu Secuiesc| Sighisoara| Sebes| Borsa|